Pyroclassic Wood Heater – Heats up to 180m2
Pyroclassic Wood Heater
Firstly, the Pyroclassic is not a normal wood heater. In short, it’s a highly efficient, high performance miniature wood furnace that heats for hours and hours.
Most noteworthy, the firebox is made from ceramics. As a result, it burns wood at a higher temperature and 3 times more efficient than traditional heaters.
Furthermore, being Designed over 30 years ago in New Zealand, it heats up to 180m2 with ease.
Most importantly, it has a 5.5 star performance rating. This is thanks to a 75% efficiency rating and a 0.3g/kg emissions rating.
- 12+ hour burn time.
- Ceramic round firebox.
- 450mm deep firebox.
- Optional Wet back (hot water booster).
- Cook top with optional oven.
- over 100 Colours available.
Massive Heat Storage
Due to more than 40 kilograms of heat storage, the Pyroclassic can store a massive amount of excess heat. This is generated by a hot, bright fire inside its thick cylindrical fire chamber. This differs from the industry standard fire bricks, which are incapable of storing this level of excess heat. The Pyroclassic IV is the only clean air approved fire to provide a 12 hour+ overnight burn*.
Unique Air Control
The Pyroclassic IV’s air controls are fully automatic. This means the fire controls the rate at which oxygen is supplied to the wood fuel. This allows it to maintain the right burn temperatures. This process ensures the glass stays clean right throughout the burn cycle. Like with most wood fires, when you dampen the fire down, this is when harm is done to the environment. Consequently, tars and poisonous unburnt gasses are released into the air.
Water Heating Capabilities
The Pyroclassic IV can be fitted with a high output wetback. This can provide up to 3.7kW of hot water for all your domestic needs. Above all, this makes for a sustainable and much more affordable way of heating your water. The wetback sits in the upper chamber of the fire, clear of the combustion zones. Therefore it receives the full heat of the gases, once they have gone through the secondary combustion phase. If you’re undecided whether you want a wetback, no problem! The wetback can be easily installed at a later date with no change to the fire itself.
If the traditional black box-style isn’t for you, There is also a huge range of more than 100 colours!
The Pyroclassic IV has a 10mm thick steel top plate which provides an excellent surface for cooking. For example, you can boil the kettle, slow cook the casserole and even bake bread. To increase the versatility of the cook top plate you can purchase the cook top oven. Additionally, it comes with a handy trivet and embroidered oven mitt.
Reviews on the Pyroclassic heater
|Rear- No Heat Shield||350mm|
|Rear - With Heat Shield||105mm|
|Side - No Heat Shield||480mm|
|Side - With Heat Shield||145mm|
|Corner - No Heat Shield||370mm|
|Corner - With Heat Shield||115mm|
|Efficiency||74% Dry / 83.3% with wet back installed|